How do I set up the RS 195 wireless headphones?

Please check out our Set Up Tutorial video: RS 195



Step 1: Remove all components from the box. These will include transmitter/charging station, headphones, power cable, audio cable, batteries and adapters.
Step 2: Insert the batteries into the headphones.
Step 3: Use the power cable to connect the transmitter/charger to an electrical outlet.
Step 4: Charge the headphones. The charge indicator light will illuminate to indicate charging. NOTE: The batteries in the headphones should be charged for 16 hours initially.
Step 5: Use the audio cable connect the transmitter/charger to the audio OUTPUT on the audio source. NOTE: Depending on your audio source you may be connecting into a 3.5mm headphone jack, red and white RCA audio outputs or a digital output.
Step 6: Turn on your audio source.
Step 7: Turn on your headphones which in turn will turn on your transmitter. The LED on the headphones will illuminate and start blinking and the LED on the transmitter will light up and remain solid.
Step 8: Wait 30-60 seconds for the wireless signal between the headphones and transmitter to be established and then you will have audio.

NOTE: If connecting to a digital output make sure that the audio device is set to output a PCM or stereo signal.

  • RS 195